]> eyrie.org Git - kerberos/krb5-strength.git/blob - debian/changelog
ebf3c858a3074dd15717bc1a81fc8bf1004d8427
[kerberos/krb5-strength.git] / debian / changelog
1 krb5-strength (3.1-2) UNRELEASED; urgency=medium
2
3   * Update standards version to 4.2.1.
4     - Enable verbose test output.
5     - Install the upstream release notes as NEWS.gz, not changelog.gz.
6     - Add Rules-Requires-Root: no.
7     - Use https for URLs in debian/copyright.
8     - Change priority to optional.
9   * Bump debian/watch version to 4 and use https.
10
11  -- Russ Allbery <rra@debian.org>  Fri, 31 Aug 2018 16:48:21 -0700
12
13 krb5-strength (3.1-1) unstable; urgency=medium
14
15   * New upstream release.
16     - New configuration option cracklib_maxlen.
17     - require_classes now supports requiring a minimum number of classes.
18     - Capitalize the first letter of error messages.
19     - Apply SuSE patch for a security vulnerability in the embedded
20       CrackLib.  This didn't affect the way it was used in this package,
21       but best to be sure anyway.
22     - Configuration instructions are now provided in installed man pages,
23       including a new krb5-strength man page, to make them more accessible
24       after installation.
25   * Patch the upstream test suite to change the expected results for a few
26     passwords that are rejected by the embedded CrackLib but accepted by
27     the system CrackLib (which the Debian package is built with).
28   * Re-enable treating test suite failures as package build failures now
29     that bug #724570 in CrackLib was fixed in Debian.
30   * Switch to the DEP-14 branch layout and update debian/gbp.conf and
31     Vcs-Git accordingly.
32   * Prefer *.tar.xz in debian/watch to match packaging.
33   * Fix Upstream-Contact email address in debian/copyright.
34   * Switch to https for all package URLs.
35   * Run wrap-and-sort -ast.
36   * Refresh upstream signing key.
37   * Enable all hardening flags.
38   * Update to debhelper compatibility level V10.
39     - Remove explicit dh-autoreconf dependency and invocation.
40     - Remove explicit --parallel flags.
41   * Update standards version to 3.9.8 (no changes required).
42
43  -- Russ Allbery <rra@debian.org>  Sun, 25 Dec 2016 12:40:41 -0800
44
45 krb5-strength (3.0-1) unstable; urgency=medium
46
47   * New upstream release.
48     - SQLite password dictionaries are now supported and can be used to
49       reject passwords within edit distance one of any dictionary word.
50     - cdbmake-wordlist has been renamed to krb5-strength-wordlist and can
51       also generate SQLite databases compatible with this plugin and
52       Heimdal quality check program.
53     - heimdal-history, a password history implementation for Heimdal, has
54       been added and can be stacked with heimdal-strength to check both
55       history and password strength.
56     - New configuration option, minimum_different, which sets the minimum
57       number of different characters required in a password.
58   * Add the upstream signing key to debian/upstream/signing-key.asc and
59     configure uscan to do signature validation.  Configure uscan to
60     download the xz tarball instead of the gz tarball.
61   * Create a _history user and group and a /var/lib/heimdal-history
62     directory on package installation for the use of heimdal-history,
63     remove the user and the standard database on purge, and remove the
64     directory if empty on package purge or removal.
65
66  -- Russ Allbery <rra@debian.org>  Wed, 26 Mar 2014 00:04:13 -0700
67
68 krb5-strength (2.2-1) unstable; urgency=low
69
70   * New upstream release.
71     - Support for more complex length-sensitive character class
72       restrictions using the new require_classes configuration setting.
73     - cdbmake-wordlist now supports filtering out words based on maximum
74       length and user-supplied regular expressions, and supports running
75       in filter mode to generate a new word list.
76   * Update to standards version 3.9.5 (no changes required).
77
78  -- Russ Allbery <rra@debian.org>  Mon, 16 Dec 2013 15:36:29 -0800
79
80 krb5-strength (2.1-1) unstable; urgency=low
81
82   * New upstream release.
83     - Improve some of the password rejection error messages.
84
85  -- Russ Allbery <rra@debian.org>  Thu, 10 Oct 2013 17:09:37 -0700
86
87 krb5-strength (2.0-1) unstable; urgency=low
88
89   * Initial upload to Debian.  (Closes: #725753)
90   * New upstream release.
91     - Add native support for the MIT Kerberos password quality plugin
92       interface included in MIT Kerberos 1.9 and later.
93     - Stop building the Heimdal plugin.  Heimdal prefers using an external
94       check program anyway.
95     - Add support for TinyCDB dictionaries with a simpler dictionary
96       lookup algorithm.  This allows use of this package to check
97       passwords against a large, fast dictionary with a minimum of
98       permutations as an alternative or supplement to the extensive
99       permutations tested by CrackLib.
100     - Minimum password length can now be enforced directly through
101       configuration of this module without relying on CrackLib.
102     - New boolean settings require_ascii_printable and require_non_letter
103       to reject passwords with non-ASCII or non-printable characters and
104       to require passwords contain at least one non-letter (and
105       non-space).
106     - The plugin and external checking program will now run without a
107       dictionary configured so that they can be used only to check length
108       and the lighter character restrictions if so desired.
109     - When checking for passwords based on the principal, also check each
110       component of the principal to find passwords based on the realm.
111   * Eliminate the heimdal-strength package.  krb5-strength now builds a
112     single binary package of the same name including the MIT plugin and
113     the Heimdal external password quality program.  The Heimdal plugin is
114     not built by the Debian packaging because Heimdal prefers external
115     programs.  The plugin can be added later as a separate package if
116     there is demand.
117   * Revise the package long description for the merger of krb5-strength
118     and heimdal-strength and the new capabilities in 2.0.
119   * Recommend cracklib-runtime and tinycdb since they are required to
120     build dictionaries.  Downgrade krb5-admin-server to Enhances and add
121     heimdal-kdc.
122   * Update debhelper compatibility level to V9.
123     - Enable hardening flags, including bindnow and PIE.
124     - Enable parallel builds.
125   * Use dh-autoreconf to rebuild the build system during package builds.
126   * Use xz compression for the upstream and Debian tarballs.
127   * Add branch information to the Vcs-Git metadata.
128   * Update standards version to 3.9.4 (no changes required).
129   * Rewrite debian/copyright in copyright-format 1.0.
130   * Remove README.Debian.  All of that information is now available in the
131     installed upstream README file.
132   * Remove Bugs header now that this package is in Debian proper.
133
134  -- Russ Allbery <rra@debian.org>  Mon, 07 Oct 2013 18:56:49 -0700
135
136 krb5-strength (1.1-1) unstable; urgency=low
137
138   * New upstream release.
139     - Increase minimum password length to 8.
140     - Reject passwords formed from the username with digits appended.
141     - Reject duplicated dictionary words.
142     - Fix variable sizes on 64-bit platforms.
143   * Add a Bugs header directing bug reports to me personally.
144   * Update to debhelper compatibility level V8.
145   * Switch to Debian source package format 3.0 (quilt) with a custom local
146     patch header.
147   * Update standards version to 3.9.3 (no changes required).
148
149  -- Russ Allbery <rra@debian.org>  Fri, 11 May 2012 15:03:11 -0700
150
151 krb5-strength (1.0-1) unstable; urgency=low
152
153   * New upstream release.
154     - Add an external password strength program for Heimdal.
155     - Add a plugin for the Heimdal password strength support.
156   * Create a separate heimdal-strength package containing only the
157     external password check program for Heimdal.  The Heimdal version of
158     the libkadm5srv plugin isn't packaged for the time being.
159   * Update debhelper compatibility mode to V7.
160     - Use debhelper rule minimization with overrides.
161     - Add ${misc:Depends} to dependencies.
162   * Add Homepage, Vcs-Git, and Vcs-Browser control fields.
163   * Add a watch file.
164   * Update standards version to 3.8.4 (no changes required).
165
166  -- Russ Allbery <rra@debian.org>  Tue, 16 Feb 2010 22:47:35 -0800
167
168 krb5-strength (0.5-1) unstable; urgency=low
169
170   * New upstream release.
171     - More checks for passwords based on the principal.
172
173  -- Russ Allbery <rra@debian.org>  Wed, 18 Jul 2007 23:16:37 -0700
174
175 krb5-strength (0.3-1) unstable; urgency=low
176
177   * New upstream release with a different name.
178     - Many cleanups to the code and build system.
179     - Unnecessary differences from CrackLib removed.
180     - Some Debian CrackLib patches applied for robustness.
181   * Updated README.Debian with a better example kdc.conf entry.
182   * No longer install the packer binary.  We can use the one from
183     cracklib-runtime.
184
185  -- Russ Allbery <rra@debian.org>  Fri, 23 Mar 2007 15:27:50 -0700
186
187 krb5-passwd-strength (0.2-1) unstable; urgency=low
188
189   * Initial release.
190
191  -- Russ Allbery <rra@debian.org>  Thu, 22 Jun 2006 15:07:03 -0700
192